• Your vehicle is loaded such that the front end of thevehicle points upward, causing the Intellibeamsensor to aim high and not detect headlamps andtaillamps.• You are driving on winding or hilly roads.You may need to manually disable or cancel thehigh-beam headlamps by turning the low-beamheadlamps on, if any of the above conditions exist.Disabling and Resetting Intellibeam™at the Rearview MirrorIntellibeam™ can be disabled by using the controls onthe inside rearview mirror.AUTO 3 (On/Off): To disable the system, press thisbutton on the inside rearview mirror. The Intellibeam™indicator will turn off and the will not come back on untilthe Intellibeam™ button is pressed again.(Stalk Disable): When Intellibeam™ has turned on thehigh-beams, pull or push the high-beam stalk. Thiswill disable Intellibeam™. The Intellibeam™ indicator onthe mirror will turn off. To re-enable Intellibeam™,press the Intellibeam™ button on the mirror.A different sensitivity setting is available for dealerdiagnostics. This is done by pushing and holding thisbutton for 20 seconds until the Intellibeam™ indicatorlight flashes three times. If you accidentally activate this,the vehicle’s setting will automatically be reset eachtime the ignition is turned off and then on again.Cleaning the Intellibeam™ Light SensorThe light sensor is locatedon the inside of the vehiclein front of the insiderearview mirror.Clean the light sensor window, periodically, usingglass cleaner on a soft cloth. Gently wipe the sensorwindow. Do not spray glass cleaner directly on thesurface of the sensor window.3-33
