Turn the radio clock display on or off by followingthese steps:1. Press the clock button until the clock and datesetting menus appear.2. Press the pushbutton located under the forwardarrow label until the menu for default clock anddate settings appear.3. Press the pushbutton located under the currentlydisplayed status of either ON or OFF. The ONdisplay indicates the radio clock display is disabledand the OFF display indicates the radio clockdisplay is enabled. Press this pushbutton to togglethe radio clock display on or off.If the radio clock display is turned on, the screenwill display Radio Clock ON for five seconds,then return to the original clock display menu.If the radio clock display is turned off, the screenwill display Radio Clock OFF for five seconds. Themenus for clock and date settings will be removed,and the ON display will appear as a currentstatus indicating that the clock display can be turnedon, if desired.The radio clock and analog clock are not synchronized.Occasionally you may need to set the digital radioclock using the procedure below to synchronizeboth clocks.Setting the Time and Date on the DigitalRadio ClockIf your vehicle has a radio with a single CD player, ithas a clock button for setting the time and date. To setthe time and date, do the following:1. Press the clock button and HR, MIN, MM, DD,YYYY (hour, minute, month, day, and year) willappear on the display.2. Press the pushbutton located under each one ofthe labels that you want to change. Every time thepushbutton is pressed again, the time or thedate if selected, will increase by one.• Another way to increase the time or date, is topress the right SEEK arrow or the FWD button.3. To decrease the time or date, press the left SEEKarrow or the REV button. You can also rotate thetune knob to adjust the selected setting.3-99
