To program each front window, follow these steps:1. With the ignition in ACCESSORY, ON, or whenRetained Accessory Power (RAP) is active, closeall doors.2. Press and hold the power window switch until thewindow has fully opened.3. Pull the power window switch up until the window isfully closed.4. Continue holding the switch up for approximatelytwo seconds after the window is completely closed.The window is now reprogrammed. Repeat the processfor the other windows.Express Window Anti-Pinch FeatureIf any object is in the path of the window whenthe express-up is active, the window will stop at theobstruction and auto-reverse to a preset factory position.Weather conditions such as severe icing may alsocause the window to auto-reverse. The windowwill return to normal operation once the obstruction orcondition is removed.Express Window Anti-Pinch Override{CAUTION:If express override is activated, the windowwill not reverse automatically. You or otherscould be injured and the window could bedamaged. Before you use express override,make sure that all people and obstructions areclear of the window path.In an emergency, the anti-pinch feature can beoverridden in a supervised mode. Hold the windowswitch all the way up to the second position. The windowwill rise for as long as the switch is held. Once theswitch is released, the express mode is re-activated.In this mode, the window can still close on an object inits path. Use care when using the override mode.2-17
