9-88 Vehicle Care10. Inflate the tire to therecommended inflationpressure using the pressuregage (C). The recommendedinflation pressure can be foundon the Tire and LoadingInformation label. See TirePressure on page 9‑66.The pressure gage (C) mayread higher than the actual tirepressure while the compressoris on. Turn the compressor offto get an accurate pressurereading. The compressor maybe turned on/off until thecorrect pressure is reached.Notice: If the recommendedpressure cannot be reached afterapproximately 25 minutes, thevehicle should not be drivenfarther. The tire is too severelydamaged and the tire sealant andcompressor kit cannot inflate thetire. Remove the power plug fromthe accessory power outlet andunscrew the inflating hose fromthe tire valve. See RoadsideService on page 12‑6.11. Press the on/off button (B) toturn the tire sealant andcompressor kit off.The tire is not sealed andwill continue to leak airuntil the vehicle is driven andthe sealant is distributed inthe tire, therefore, Steps 12through 18 must be doneimmediately after Step 11.Be careful while handling thetire sealant and compressor kitas it could be warm afterusage.12. Unplug the power plug (H) fromthe accessory power outlet inthe vehicle.13. Turn the sealant/air hose (F)counterclockwise to remove itfrom the tire valve stem.14. Replace the tire valvestem cap.15. Replace the sealant/airhose (F), and the powerplug (H) back in their originallocation.