2-54 Seats and RestraintsSecuring a Child RestraintDesigned for the LATCHSystem{ WARNINGIf a LATCH-type child restraint isnot attached to anchors, the childrestraint will not be able to protectthe child correctly. In a crash, thechild could be seriously injured orkilled. Install a LATCH-type childrestraint properly using theanchors, or use the vehicle'ssafety belts to secure therestraint, following the instructionsthat came with the child restraintand the instructions in thismanual.{ WARNINGDo not attach more than one childrestraint to a single anchor.Attaching more than one childrestraint to a single anchor couldcause the anchor or attachmentto come loose or even breakduring a crash. A child or otherscould be injured. To reduce therisk of serious or fatal injuriesduring a crash, attach only onechild restraint per anchor.{ WARNINGChildren can be seriously injuredor strangled if a shoulder belt iswrapped around their neck andthe safety belt continues totighten. Buckle any unused safety(Continued)WARNING (Continued)belts behind the child restraint sochildren cannot reach them. Pullthe shoulder belt all the way outof the retractor to set the lock,if your vehicle has one, after thechild restraint has been installed.Notice: Do not let the LATCHattachments rub against thevehicle’s safety belts. This maydamage these parts. If necessary,move buckled safety belts toavoid rubbing the LATCHattachments.Do not fold the empty rear seatwith a safety belt buckled. Thiscould damage the safety belt orthe seat. Unbuckle and return thesafety belt to its stowed position,before folding the seat.