DRIVING AND OPERATING 215Increasing Speed While ACC is at aSet SpeedIf ACC is already activated, do one ofthe following:. Use the accelerator to get to thehigher speed. Press SET– down.Release the control and theaccelerator pedal. The vehicle willnow cruise at the higher speed.When the accelerator pedal ispressed, ACC will not brakebecause it is overridden. The ACCindicator will turn blue on theinstrument cluster and theHead-Up Display (HUD).. Press and hold +RES up until thedesired set speed appears on thedisplay, then release it.. To increase vehicle speed in smallincrements, press +RES up to thefirst detent. For each press, thevehicle goes 1 km/h (1 mph)faster.. To increase vehicle speed in largerincrements, press +RES up to thesecond detent. For each press, thevehicle speed increases to the next5 km/h (5 mph) mark on thespeedometer.When it is determined that there is novehicle ahead or the vehicle ahead isbeyond the selected following gap,then the vehicle speed will increase tothe set speed.The speedometer reading can bedisplayed in either English or metricunits. See Instrument Cluster 0 119.The increment value used depends onthe units displayed.Reducing Speed While ACC is at aSet SpeedIf ACC is already activated, do one ofthe following:. Use the brake to get to the desiredlower speed. Press SET− down andrelease the accelerator pedal. Thevehicle will now cruise at thelower speed.. Press and hold SET– down untilthe desired lower speed is reached,then release it.. To decrease the vehicle speed insmaller increments, press SET−down to the first detent. For eachpress, the vehicle goes about1 km/h (1 mph) slower.. To decrease the vehicle speed inlarger increments, press SET−down to the second detent. Foreach press, the vehicle speeddecreases to the next 5 km/h(5 mph) mark on the speedometer.The speedometer reading can bedisplayed in either English or metricunits. See Instrument Cluster 0 119.The increment value used depends onthe units displayed.Selecting the Follow DistanceWhen a slower moving vehicle isdetected ahead within the selectedfollowing gap, ACC will adjust thevehicle's speed and attempt tomaintain the follow distance gapselected.Press [ on the steering wheel toadjust the following gap. Each presscycles the gap button through threesettings: Far, Medium, or Near.
