DRIVING AND OPERATING 217braking is active, the brake lamps willcome on. The automatic braking mayfeel or sound different than if thebrakes were applied manually. This isnormal.Stationary or Very Slow-MovingObjects{ WarningACC may not detect and react tostopped or slow-moving vehiclesahead of you. For example, thesystem may not brake for a vehicleit has never detected moving. Thiscan occur in stop-and-go traffic orwhen a vehicle suddenly appearsdue to a vehicle ahead changinglanes. Your vehicle may not stopand could cause a crash. Usecaution when using ACC. Yourcomplete attention is alwaysrequired while driving and youshould be ready to take action andapply the brakes.ACC Automatically DisengagesACC may automatically disengage andthe driver will need to manually applythe brakes to slow the vehicle if:. The sensors are blocked.. The Traction Control System (TCS)or electronic stability controlsystem has activated or beendisabled.. The radar falsely reports blockagewhen driving in a desert or remotearea with no other vehicles orroadside objects. A DIC messagemay display to indicate that ACCis temporarily unavailable.. There is a fault in the system.The ACC indicator will turn whitewhen ACC is no longer active.Notification to Resume ACCACC will maintain a follow gap behinda detected vehicle and slow yourvehicle to a stop behind that vehicle.If the stopped vehicle ahead hasdriven away and ACC has notresumed, the vehicle ahead symbolwill flash as a reminder to checktraffic before proceeding. In addition,the left and right sides of the SafetyAlert Seat will pulse three times,or three beeps will sound. See “AlertType” and “Go Notifier” in “Collision/Detection Systems” under VehiclePersonalisation 0 143.When the vehicle ahead drives away,press +RES or the accelerator pedal toresume ACC. If stopped for more thantwo minutes or if the driver door isopened and the driver seat belt isunbuckled, the ACC automaticallyapplies the Electric Parking Brake tohold the vehicle. The EPB status lightwill turn on. See Electric Parking Brake0 200. To release the EPB, depress theaccelerator pedal.A DIC warning message may displayindicating to shift to P (Park) beforeexiting the vehicle.{ WarningIf ACC has stopped the vehicle, andif ACC is disengaged, turned off,or cancelled, the vehicle will no(Continued)
