Advanced Guide TroubleshootingContents > Routine Maintenance > Replacing a FINE Cartridge > Checking the Ink StatusChecking the Ink StatusYou can check the ink status on the LCD.NoteThe ink level detector is mounted on the machine to detect the remaining ink level. The machineconsiders as ink is full when a new FINE Cartridge is installed, and then starts to detect a remainingink level. If you install a used FINE Cartridge, the indicated ink level of it may not be correct. In suchcase, refer to the ink level information only as a guide.When remaining ink cautions or errors occur, the message will appear to inform you of the error.Refer to "An Error Message is Displayed on the LCD" in " Troubleshooting" of the on-screen manual:Advanced Guide , and take an appropriate action.(1) Make sure that the power is turned on, and press the Setup button.(2) Select Display remaining ink level , and press the OK button.Example: (A)The ink is running low. Prepare a new ink cartridge.NoteYou can also check the ink status on a screen of the LCD displayed while printing.Page topPage 142 of 1086 pagesChecking the Ink Status
