Check the Page Size list. When you want to change, select another page size from the list. The listdisplays only sizes that can be used for borderless printing.4. Adjust the amount of extension from the paperIf necessary, adjust the amount of extension using the Amount of Extension slider.Moving the slider to the right increases the amount extending off the paper, and moving the slider tothe left decreases the amount.It is recommended to set the slider at the second position from the right for most cases.ImportantWhen you set the slider at the rightmost position, the back side of the paper may becomesmudged.5. Complete the setupClick OK.When you execute print, the data is printed without any margins on the paper.ImportantWhen a page size that cannot be used for borderless printing is selected, the size is automaticallychanged to the valid page sizes for borderless printing.When High Resolution Paper, T-Shirt Transfers, or Envelope is selected from the Media Type list onthe Main tab, you cannot perform borderless printing.When Borderless is selected, the Printer Paper Size, Staple Side (when Duplex Printing is notselected) settings, and the Stamp/Background... (Stamp...) button on the Page Setup tab appeargrayed out and are unavailable.Depending on the type of the media used during borderless printing, the print quality maydeteriorate at the top and bottom of the sheet or stains may form.When the ratio of the height to the width differs from the image data, a portion of the image may notbe printed depending on the size of the media used.In this case, crop the image data with an application software according to the paper size.NoteWhen Plain Paper is selected for Media Type on the Main tab, borderless printing is notrecommended, and therefore the message for media selection appears.When you are using plain paper for test printing, select Plain Paper, and click OK.Expanding the Range of the Document to PrintSetting a large amount of extension allows you to perform borderless printing with no problems.However, the portion of the document extending off the paper range will not be printed. Subjects aroundthe perimeter of a photo may not be printed.Try borderless printing once. When you are not satisfied with the result of borderless printing, reduce theamount of extension. The extension amount decreases as the Amount of Extension slider is moved tothe left.ImportantWhen the amount of extension is shortened, an unexpected margin may be produced on the print,depending on the size of the paper.NoteWhen the Amount of Extension slider is set to the leftmost position, image data will be printed in thefull size.When Preview before printing is checked on the Main tab, you can confirm before printing whetherthere will be no border.Page 301 of 1086 pagesBorderless Printing
