Trimming Default (Off: No trimming), On (follow the camera's setting), OffSettings on the MachineYou can change the PictBridge print settings from the PictBridge print settings screen. Set the printsettings to Default on the PictBridge compliant device when you want to print according to thesettings on the machine.This section describes the procedure to display the PictBridge print settings screen. For settingitems, see PictBridge print settings .1. Make sure that the machine is turned on.2. Press the Setup button.3. Select Device settings, then press the OK button.4. Use the button to select PictBridge print settings, then press the OK button.The PictBridge print settings screen is displayed.Page topPage 808 of 1086 pagesAbout PictBridge Print Settings
