telephone company, your telephone company will assign two or more telephone numbers withdistinctive ring patterns to your single telephone line, allowing you to have different numbers for faxcalls and voice calls using only one telephone line. Your machine will automatically monitor the ringpattern, and will automatically receive the fax if the ring pattern is a fax call.To use DRPD, follow the procedure below to set the fax ring pattern that matches the patternassigned by your telephone company.NoteContact your local telephone company for detailed information on this service.1. Display the DRPD: FAX ring pattern screen.(1) Press the Setup button.(2) Select Device settings , and press the OK button.(3) Select FAX settings, and press the OK button.(4) Select Reception settings, and press the OK button.(5) Select DRPD: FAX ring pattern, and press the OK button.2. Select the ring pattern.(1) Select the ring pattern that your telephone company assigned to your faxnumber.Select from Normal ring, Double ring, Short-short-long, Short-long-short, or Other ring type.(2) Press the OK button.3. Press the FAX button to return to the fax standby screen.Selecting a Receive ModeYou can select the receive mode suitable for your fax use conditions: whether or not you receivevoice calls, and if you receive voice calls, how frequently you receive faxes or voice calls, etc.Select the receive mode according to the following procedure.Each mode has the option settings. Specify those settings if necessary.For details, refer to the on-screen manual: Advanced Guide .When receiving voice calls (with a telephone or answering machineconnected to the machine):When mainly receiving a voice call:TEL priority modeWhen a call incomes, the telephone will ring. *1- If the call is a voice call, pick up the handset.- If the call is a fax, pick up the handset. When the machine starts receiving the fax, hang up thehandset.- If the answering machine is connected, the message will respond when you do not pick up thehandset.Page 31 of 1086 pagesSetting the Receive Mode
