The LCD will turn off if the machine is not operated for about 5 minutes. To restore thedisplay, press any button except the ON button or perform the print operation. The displaywill be also restored when receiving faxes.(6) , , , and buttons (Scroll Wheel)Used to select a menu or setting item. The or button is also used to enter characters.See Basic Operation in Each Mode.(7) OK buttonFinalizes the selection of a menu or setting item.Resolves an error when printing is in progress or resumes the machine's normal operation after removingjammed paper or to eject documents remaining in the ADF.(8) Numeric buttonsUsed to enter numerical values such as the number of copies, as well as fax/telephone numbers andcharacters.(9) Redial/Pause buttonDisplays the list of numbers dialed with the Numeric buttons to redial the selected number. You can alsouse this button to enter pause time between or after numbers when dialing or registering numbers forexample international calls.(10) Coded Dial buttonDisplays the coded speed dial list or telephone number search list on the coded speed dial screen. You candial a recipient from the list.(11) Stop buttonCancels operation when print, copy, scan, or fax transmission/reception job is in progress.(12) Black buttonStarts to make black & white copy, scan, fax transmission, etc. This button lights blue when available.(13) Color buttonStarts to make color print, copy, scan, fax transmission, etc. This button lights blue when available.(14) Hook buttonConnects or disconnects the telephone line.(15) Tone buttonSwitches to tone dialing temporarily or changes the input mode when entering characters. This button isalso used to dial with the Numeric buttons.(16) Back buttonReturns the LCD to the previous screen.(17) Function buttonsUsed to select an item displayed at the bottom of the LCD.See Basic Operation in Each Mode.(18) CARD buttonSwitches the machine to the card mode.See Basic Operation in Each Mode.(19) SCAN buttonSwitches the machine to the scan mode.See Basic Operation in Each Mode.(20) Setup buttonDisplays the setup menu.See Basic Operation in Each Mode.(21) Alarm lampLights or flashes orange when an error occurs, such as paper-out or ink-out.NoteThe machine makes the beep sound when pressing buttons on the Operation Panel.Page 9 of 1086 pagesMain Components
