Selecting the Paper Size (Paper Select) 2-172 Making Copies Using the Basic FunctionsUsing the Stack BypassTo make copies on transparencies or special (heavyweight) paper stock, use the stack bypass. Thefollowing types of paper can be copied using the stack bypass. Standard sizes11"x17", LGL, LTR, A3, B4, A4, B5R, A5R Irregular sizesIrregular size paper: 3 7/8" to 11 11/16" (99 mm to 297 mm) (Vertical)7 1/2" to 17" (191 mm to 432 mm) (Horizontal) MaterialsPlain paper, heavyweight paper, plain 2 paper, recycled paper, colored paper, rough paper, bondpaper, transparencies, labels EnvelopesCOM10, Monarch, DL, ISO-B5, ISO-C5, YOUGATA 4Manual feed settings can be made in four ways: Placing paper in the stack bypass and specifying the size (See “Using the Stack Bypass,” onp. 2-17.) Using the stack bypass for a job in the print queue (See “Using the Stack Bypass for a Job inthe Print Queue,” on p. 2-23.) Registering the stack bypass for a function in Additional Functions (See “When the StackBypass is Registered for a Function in Additional Functions,” on p. 2-28.) Placing paper in the stack bypass and using existing settings. (See “When Placing Paper inthe Stack Bypass and Using Existing Settings,” on p. 2-28.)IMPORTANT• Note the following points when using the stack bypass:- Copy quantity: 1 to about 100 sheets (stack approximately 3/8" (10 mm high))- Paper weight: 16 to 32-lb. bond (60 to 128 g/m 2 )- Curl down paper before use.- There are some types of paper stock whose copy settings meet the above specifications but cannot befed in the stack bypass.NOTE• Two-sided copying is not available when using transparencies, envelopes, labels, or heavy paper(paper heavier than plain paper (30 to 32-lb. bond) (128 g/m 2 )).
