3. Confirm that the following information is set, and click [Cancel] if the settings are correct. If incorrect informationis set, correct it and click [Configure].• [Delivery Server URL] : https://device.c-cdsknn.net/cds_soap/updaterif• [Log Level] : 1 to 4CAUTION:The larger the value of the log level is, the more detailed the output log is (see the table below). Since changing the loglevel setting affects the performance, do not set a higher level than required. (Unless asked to do so by the Support Dept.of the sales company or the Canon R&D.)Especially when the level 4 is set, the performance will be significantly lower and it will take time to collect logs.Log Level and Leg Output TypeLog OutputTypeLog Level Description0 1 2 3 4Trace - - - - Yes Detailed logs for debugInformation - - - Yes Yes Logs related to operations done on the systemImportantMessage- - Yes Yes Yes Update logs output by firmware typeInstallation logs by MEAP applicationLogs related to enabled functions by system optionOrdinary Er-ror- Yes Yes Yes Yes Logs for ordinary errorsSystem Error Yes Yes Yes Yes Yes Logs for internal system errors4. Click [Yes] when a dialog box confirming whether you want to update the settings is displayed.This completes the procedure for confirming the URL setting of the distribution server.Communication Test with the Distribution ServerThis section describes how to check if the communication is normally done to the distribution server and/or the file server.NOTE:Since the server accessed by the CDS function and the server accessed by the RDS function differ, make sure to perform acommunication test for the CDS function even if the communication test for the RDS function is successful.1. Access the following URL from the browser on a PC connected to the same network as this machine, and log in tothe management screen.URL : https://:84433/svm/Password : *28*2. Select [Display Log/Communication Test], and click [Communications Test].3. Technical Explanation (System)48
