■ Setting ItemsConfigure E-RDS in service mode. The setting items are described below.Example of the Remote UI ScreenSERVICE MODEPANEL LOCK GR.Check CounterSERVICE MODEInitialize NemuSERVICE MODEPANEL LOCK GR.F/W UPDATE GR.NETWORK GR.SP. ADMIN. MODENETWRK GR.BUFFER LIMITE-RDSCA-KEYMIB CHARGECOUNTE-RDSE-RDS SWITCHRGW-ADDRESSRGW-PORTCOM-TESTE- SWITCHOFFOnExample of the Control Panel ScreenService mode Description Setting valueE-RDS SWITCH The switch for enabling Embedded-RDS.Enables this function.ON: Use Embedded-RDSOFF: Do not use Embedded-RDS (default value)RGW-AD-DRESSThe destination URL for the UGW server.Use the "up, down, left and right keys, Job Status/Cancel key and Feeder selectionkey" to enter URL, and "OK key" to determine it. "↓" is displayed at the end of thecharacter string. The number of characters which can be entered is 128.The default value is the server URL.Characters which can be set are as follows.01233456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvw-xyz!”#$%&’()*+,-./:;<=>?@[¥]^_`{|}~If "ugwdevice.net/" is not included in the character string when entering the URL, it isjudged as an authentication error and an error message is displayed.https://a01.ugwdevice.net/ugw/agen-tif010RGW-PORT The port number used when communicating with the UGW server. 443COM-TEST Executes a communication test with the UGW server and displays the result. -COM-LOG Displays details of the communication test result.Attempts to communicate with the UGW server, and the time, error codes and errorinformation of errors up to the present date are displayed. Maximum of 5 logs aresaved, and the latest log is displayed. Error information is 130 byte maximum.-CLEAR Initializes the setting values related to E-RDS.Clears the schedule information, alarm errors, and filtering information.-■ Procedure for Setting E-RDSRefer to the above service mode setting items to specify the initial settings of E-RDS.3. Technical Explanation (System)90
