04L9-02RWhen the printer is turned ON, the initial setting screen appears.Specify the setting using the following procedure.NOTEAbout the initial setting screenThe initial setting screen is displayed only when the printer is turned ON for the first time.1Press the power switch to turn the printer ON. The indicators and display on the control panel come on, and the printer initiates a self-diagnostic test on the printerunit and optional accessories.If no abnormality is found during the self-diagnostic test, the Main Power indicator (green), (Ready) indicator (green),(Online) indicator (green) and Paper Source indicator (green) come on, appears in the display, andthe printer is ready to print.IMPORTANTDo not turn the printer ON immediately after turning it OFF.If you want to cycle the power of the printer, wait at least 10 seconds before turning it ON again.If the printer does not operate properly"Troubleshooting"If an error message appears in the display on the control panel"A Message Appears in the Control Panel"When turning ON the printer for the first time after installing the printer and paper feederDo not load paper in the paper drawer."Printer Installation"Turning the Power On and Specifying a Language㻝㻟㻜㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
