If the SSL encrypted communication function is not used, this item cannot be set by the RemoteUI. Either enable the SSL encrypted communication function, or set from the control panel usingthe following procedure.a. Press [ ] ( 1 2 (3 %) (3 ,! 4 ) set [SNMP v. 3] to [On].b. Set each password using [Auth. Password] from [User Settings 1] to [User Settings 5].For details on the SSL encrypted communication function, see "Setting Keys and Certificates."7. If [Security Settings] are set to [Authentication Yes/Encryption Yes], set an encrypted password.Set [Encryption Algorithm] to [DES] or [AES].[EncryptionPassword]:Enter the password to be used for the encryption function of the encryptionalgorithm. 6 to 16 alphanumeric characters can be entered.[Confirm]: To confirm the password, enter the entered [Encryption Password] again.If the SSL encrypted communication function is not used, this item cannot be set by the RemoteUI. Either enable the SSL encrypted communication function, or set from the control panel usingthe following procedure.a. Press [ ] ( 1 2 (3 %) (3 ,! 4 ) 㻟㻤㻜㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
