04L9-07LThis section describes the setting items which are common to each protocol to use this printer in a network environment.Selecting a Communication Method or Ethernet TypeIf you want to fix the type of communication method and Ethernet type, set [Auto Detect] on the Ethernet Drive Setting to[Off]. (This printer can detect the communication method and Ethernet type automatically. Normally, you do not need tospecify the setting.)"Changing the Network Transmission Speed or Transfer Mode"Specifying the Setting for Startup Waiting TimeIf the printer cannot be connected to a network, see the following item and specify the setting for the startup waiting time.(Normally, you do not need to change the setting for startup waiting time.)"Specifying the Setting for Startup Waiting Time"Setting the Spooling FunctionYou can speed up the exiting time of the computer to which you send print jobs, see the following item and configure thespooler function."Setting the Spooling Function (LBP6680x Only)"Restricting the Users Who Can Monitor and Change the SettingsIf you want to restrict the users who can monitor and change the settings, see the following items and configure the SNMPprotocol."Restricting the Users Who Can Monitor/Change the Settings Using the SNMP Protocol"Setting IEEE802.1X AuthenticationYou can specify the settings for using IEEE802.1X authentication with the printer."Setting IEEE802.1X Authentication"Network Setting ItemsThis section describes the setting items which you can change using a Web browser (Remote UI), FTP Client, or NetSpotDevice Installer."Network Setting Items"Initializing the Network SettingsYou can reset the network settings for the printer to the default values."Initializing the Network Settings"Checking the MAC AddressYou can check the MAC address by printing Network Status Print."Checking the MAC Address"Network Settings for the Printer (Common to Each Protocol)㻟㻡㻜㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
