7Specify the settings for [Color Settings] as the following, as needed.[GrayscaleConversion]Select the method for converting color print data to grayscale for printing.You can set it for these data types: [Text], [Graphics] or [Image].This setting is for converting color data to B&W data.[sRGB]: It calculates the grayscale value using the RGB standard color conversionmethod.[NTSC]: It calculates the grayscale value using the NTSC standard color conversionmethod.[UniformRGB]:It takes the average value of the Red, Green and Blue color values as thegrayscale value.8Specify the settings for [Print Settings] as the following, as needed.[Copies] Specify the number of copies to be printed.[Paper Size]Specify the size of paper to print.If data is input that is outside the engine's maximum and minimum paper size range when thepaper size is automatic, it is printed on the paper size that is set with [Standard Paper Size].[Auto]: It selects the most suitable paper source for the XPS file page size, andprints.Other than[Auto]:It prints so that the long side of the XPS file and the long side of the selectedpaper size go in the same direction.[Paper Type] Specify the type of paper to print.[Manual Feed] You can fix the paper source in the multi-purpose tray.㻞㻤㻥㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
