04L9-0RKFollow the steps in the procedure below to assign the IP address to the printer.1Open the router setup screen.For instructions on how to open the router setup screen, see the instruction manual that comes with the router you areusing or consult the manufacturer or your network administrator.2Determine which IP address to assign to the printer.Your router is preconfigured to assign a specific range of IP addresses using DHCP. Check which range of IP addressesyour router assigns using DHCP and assign an IP address outside that range to the printer.This prevents this printer from being assigned the same IP address already assigned to another device.Example: Router setup screen* This example shows the range of IP addresses the router assigns using DHCP is from 192.168.11.2 to 192.168.11.65.You need to assign an IP address within a range from 192.168.11.66 to 192.168.11.254.NOTEIP addressAn IP address is a unique address used in order to identify any device connected to a network. It consists of four sets ofnumbers from 0 to 255 separated by three periods (.), as shown by the example, "192.168.11.1".Determining Which IP Address to Assign to the Printer㻠㻞㻟㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
