(1) Select the [Single Port] check box.(2) Enter the port number (0 to 65535).7Set [IKE Mode] and [AUTH Method] under [IKE Settings].(1) Select [Main] or [Aggressive] under [IKE Mode].(2) Select [AUTH Method].If you want to specify [Pre-Shared Key Method]a. Select the [Pre-Shared Key Method] check box.b. Click [Shared Key Settings...].c. Enter the name of the shared key (up to 24 characters), and then click [OK].If you want to specify [Digital Signature Method]a. Select the [Digital Signature Method] check box.b. Click [Key and Certificate...].c. Select the key to use, and then click [Default Key Settings].NOTE[AUTH Method] SettingsIn order to set [Pre-Shared Key Method], the SSL encrypted communication function must be enabled."Setting the SSL Encryption Communication Function"We recommend that network settings be performed by the network administrator."Setting Keys and Certificates"8Set [Authentication/Encryption Algorithm] under [IKE Settings].㻣㻟㻜㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
