04L9-00WWARNINGDo not disassemble or modify the printer. There are high-temperature and high-voltage components inside theprinter which may result in a fire or electrical shock.Electrical equipment can be hazardous if not used properly. Do not allow children to touch the power cord, cables,internal gears, or electrical parts.If the printer makes an unusual noise or emits smoke, heat, or an unusual smell, immediately turn OFF the powerswitch and disconnect the interface cables if they are connected. Then, unplug the power plug from the AC poweroutlet and contact your local authorized Canon dealer. Continued use can result in a fire or electrical shock.Do not use flammable sprays near the printer. If flammable substances come into contact with electrical parts insidethe printer, this may result in a fire or electrical shock.Always turn OFF the power switch and unplug the power plug and interface cables before moving the printer.Failure to do so can damage the cables or cords, resulting in a fire or electrical shock.Confirm that the power plug or power connecter is inserted completely after moving the printer. Failure to do so canresult in an overheating and fire.Do not drop paper clips, staples, or other metal objects inside the printer. Also, do not spill water, liquids, or otherflammable substances (alcohol, benzene, paint thinner, and so on) inside the printer. If these items come intocontact with a high-voltage area inside the printer, this may result in a fire or electrical shock. If these items aredropped or spilled inside the printer, immediately turn OFF the power switch and disconnect the interface cables ifthey are connected. Then, unplug the power plug from the AC power outlet and contact your local authorized Canondealer.When plugging or unplugging a USB cable when the power plug is plugged into an AC power outlet, do not touchthe metal part of the connector, as this can result in electrical shock.CAUTIONDo not place heavy objects on the printer. The object or the printer may fall, resulting in personal injury.Be careful when handling the main board or the ROM. Touching the main board or the sharp parts such as theedges of the ROM may result in personal injury.Turn OFF the power switch when the printer will not be used for a long period of time, such as overnight. Turn OFFthe printer and unplug the power plug if the printer will not be used for an extended period of time, such as forseveral days.Open or close covers and install or remove drawers gently and carefully. Be careful not to hurt your fingers.Keep your hands and clothing away from the roller in the output area. Even if the printer is not printing, the rollermay suddenly rotate and catch your hands or clothing, resulting in personal injury.Do not take your hands off the transport guide until it moves back to its original position when tilting the transportguide toward you. The transport guide may snap back to its original position, and this may result in personal injury.The output slot is hot during and immediately after printing. Do not touch the area surrounding the output slot, asthis may result in burns.Printed paper may be hot immediately after being output. Be careful when removing the paper and aligning theremoved paper, especially after continuous printing. Failure to do so may result in burns.The laser beam used in the printer can be harmful to human bodies. The laser beam is confined in the laserscanner unit by a cover, so there is no danger of the laser beam escaping during normal printer operation. Read theHandling㻟㻣㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
