a. Select the [Specify by Time] check box.b. Enter the time (1 to 65535 minutes).When specifying by sizea. Select the [Specify by Size] check box.b. Enter the size (1 to 65535 MB).NOTEAbout PFSIf PFS is used, the key generation process becomes complex. Even assuming one key is deciphered, it does not meanthat later keys will be deciphered easily.10Set [Authentication/Encryption Algorithm] under [IPSec Network Settings].When setting automaticallySelect the [Auto] check box.When setting authentication using ESP protocol(1) Select the [ESP] check box.(2) Select the authentication algorithm from [SHA1], [MD5], [SHA1 and MD5] or [NULL] under [ESP Authentication].(3) Select the encryption algorithm from [3DES-CBC], [AES-CBC], [3DES-CBC and AES-CBC] or [NULL] under [ESPEncryption].When setting authentication using AH protocol(1) Select the [AH] check box.(2) Select the authentication algorithm from [SHA1], [MD5] or [SHA1 and MD5] under [AH Authentication].11Click [OK].㻣㻟㻞㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
