04L9-0AXNOTETable descriptionBold values in the table indicate the default settings.Setting Item Setting Value Setting[Job Timeout] 0 to 3600 secondsIf the time specified in this item has elapsed since a job process wasstarted, the printer automatically finishes the job and receives the nextjob.If you do not want to specify the timeout, specify "0 seconds."[Print PS Errors] [Off], [On] Specifies whether an error page should be printed when a PostScripterror is occurring.[Halftones][Text]:[Resolution],[Gradation], [HighResolution][Graphics]:[Resolution],[Gradation], [HighResolution][Image]:[Resolution],[Gradation], [HighResolution]You can select the halftone display method from[Resolution], [Gradation] and [High Resolution].[Resolution] allows you to perform printing that combines smoothgradation with edge quality. It is suitable for printing graphics orgraphs that use gradation.[Gradation] allows you to print with a sharp gradation and well-balanced texture, contrasting light and shade, which is best suitedfor printing photo images.[High Resolution] allows you to print in fine detail so that theedges of text data can be seen clearly. It is suitable for printingdata containing text and fine lines.[GrayscaleConversion][sRGB], [NTSC],[Uniform RGB]Select the method for converting color print data to grayscale forprinting.When it is set to [sRGB], it calculates the grayscale value usingthe sRGB standard color conversion method.When it is set to [NTSC], it calculates the grayscale value usingthe NTSC standard color conversion method.When it is set to [Uniform RGB], it takes the average value of theRed, Green and Blue color values as the grayscale value.[Dot GainAdjustment][-10%], [-5%],[Standard],[+5%], [+10%]You can adjust dotted areas to change darkness and lightness ofpainted areas. A higher number specifies a darker printed area.[Setup] Menu ([PS] Options)㻡㻥㻝㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
