Conversion] [NTSC]: It calculates the grayscale value using the NTSC standard color conversionmethod.[UniformRGB]:It takes the average value of the Red, Green and Blue color values as thegrayscale value.9Specify the settings for [Print Settings] as the following, as needed.[Copies] Specify the number of copies to be printed.[Paper Size]Specify the size of paper to print.If data is input that is outside the engine's maximum and minimum paper size range when thepaper size is automatic, it is printed on the paper size that is set with [Standard Paper Size].[Auto]: It selects the most suitable paper source for the PDF file page size, and prints.Otherthan[Auto]:It prints so that the long side of the page size of the PDF file and the long sideof the selected paper size go in the same direction.[Paper Type] Specify the type of paper to print.[Manual Feed] You can fix the paper source in the multi-purpose tray.[Enlarge/Reduce toFit Paper Size]If the check box is selected, it fixes the aspect ratio and scales it to fit with the effective printarea of the paper size that is set and prints. However if [Paper Size] is set as [Auto], this itemcannot be set.[Enlarge Print Area]Specify whether to expand the printable area and print.Depending on the document to be printed, part of the edges of the paper may not beprinted.[Print 2-Sided] Specify 1-sided or 2-sided printing.[Binding Location]Set the binding position on the long side of the paper (long-edged binding) or the short side ofthe paper (short-edged binding). If binding is set from the printer side, the position of the"gutter" is automatically adjusted on the front and back sides of the paper.㻞㻣㻟㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
