04L9-07WSpecify the setting for the spooler function using either of the following methods."Performing the Configuration Using the Printer's Control Panel (the Settings to Be Performed First)"Specify the setting for the spooler function using the control panel while checking the display on the printer."Changing the Settings Using Web Browser (Remote UI)"Specify the setting for the spooler function by accessing the printer from a Web browser via the network.IMPORTANTWhen specifying the setting for startup waiting time firstUse the printer's control panel. After configuring the TCP/IP protocol settings, you can change the settings using the Webbrowser (Remote UI) or FTP Client.Because the options which can be specified vary depending on the software, see "Network Setting Items" and useeach software appropriate to the environment you are using or options that you want to specify.The Spooling FunctionIt can only be used when the SD card is installed.NOTEChanging the settings using FTP ClientYou can also specify the setting for startup waiting time using FTP Client."FTP Client"Setting the Spooling Function (LBP6680x Only)㻟㻡㻤㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com ManualsDownloaded from www.Manualslib.com manuals search engine
