Chapter 6 Scanning With the MultiPASS C635 6-7ScanningSelecting or Cropping an Area to ScanTo select an area, click the Selection Tool icon in the upper left corner ofthe Output Device section of the ScanTastic window.❍ Click and drag a rectangle inside the preview zone to surround thearea of the image you wish to scan.To alter the selection, move the pointer to the edge or center of theselection rectangle, then click and drag to adjust the boundaries.As you move the pointer to the edges or corners of the rectangle, itchanges shape to indicate the direction in which you can drag.The hand icon indicates that you can drag the existing selectionrectangle to another portion of the preview image.❍ To select the entire scannable area, press Command+A (select All).To cancel a selection, press Command+D (Deselect).❍ Another method of selecting an area to scan is to type width andheight dimensions in the edit fields at the bottom of the Previewwindow. Once you have entered the dimensions, you can repositionthe box by hand, if necessary.Zooming In On a Selected AreaTo enlarge a section of the pre-scan image for viewing, click the ZoomTool just beneath the Selection tool. Then click & drag across the regionyou want to see enlarged.The selected area is re-scanned and enlarged in the Preview window.N Make sure the document is inserted in the ADF.
