3-8 Using the MultiPASS Fax Setup Utility Chapter 3❍ Manual Receive (Manual)—Require you to manually answer theincoming call and then set the MultiPASS for an incoming fax❍ Answering Machine Mode (AnsMode)—Automatically receive a callwith your answering machine❍ Distinct Ring Pattern Detect (DRPD)—Automatically switchbetween receiving a call either as a fax or telephone call based on thering tone for each type of call (This setting is applicable only if yousubscribe to a special network service with your phone companythat defines multiple ring tones for your phone line.)Answer Silent ReceiveYou select this option to set the MultiPASS not to ring for an incomingfax. (This is applicable only in Fax/Tel Mode and Fax Only Mode.) Thedefault is Silent Receive enabled.Answer Number of RingsIf you cleared the Silent Receive option, indicating you want theMultiPASS to ring for incoming fax calls, you specify the number oftimes the MultiPASS should ring for the fax call. The MultiPASS willonly ring if you have connected a telephone. The default is 2 rings.Receive ConditionsFor the MultiPASS C635, the Receive Condition is always set to PrintFax.Report PrintYou can specify whether or not you want a report to print with each faxreception (Every Transmission), only when there is an error (OnlyErrors), or no report (None). The default is None.Restore DefaultsIf you want to restore the options on the Receive Fax panel to thefactory defaults, click the Restore Defaults button.
