viUSERS IN CANADAPRE-INSTALLATION REQUIREMENTS FOR CANONFACSIMILE EQUIPMENTA. LocationSupply a suitable table, cabinet, or desk. See Appendix A for the unit’sdimensions and weight.B. Order Information1. Provide only a single-line to touch-tone or rotary telephone setterminated with a standard 4-pin modular phone plug. (Touch-tone isrecommended if available in your area.)2. Order an RJ11-C modular jack (USOC code), which should beinstalled by the phone company. If the RJ11-C jack is not present,installation cannot occur.3. Order a normal business line from your telephone company’s businessrepresentative. The line should be a regular voice grade line orequivalent. Use one line per unit.DDD (DIRECT DISTANCE DIAL) LINEorIDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOUCOMMUNICATE OVERSEASN Canon recommends an individual line following industry standards [e.g., the2500 (touch-tone) or 500 (rotary/pulse dial) telephones]. A dedicated extensionoff a PBX unit without “Camp On” signals is also permissible with yourMultiPASS C635. Key telephone systems are not recommended because theysend non-standard signals to individual telephones for ringing and specialcodes, which may cause a fax error.C. Power RequirementsThe power outlet should be a three-prong grounded receptacle (Single orDuplex). It should be independent from copiers, heaters, air conditioners,or any electric equipment that is thermostatically controlled. The ratedvalue is 120 volts and 15 amperes. The RJ11-C modular jack should berelatively close to the power outlet to facilitate installation.
