Chapter 5 Receiving Faxes 5-1Receiving FaxesThe MultiPASS has four Receive Modes:❍ Fax Only Mode❍ Fax/Tel Mode❍ Manual Mode❍ Answer Machine ModeYou set the Receive Mode during the MultiPASS installation procedure.(See your Quick Start Guide for details.)You can change the Receive Mode and the Receive Fax options throughthe MultiPASS Fax Setup Utility. See “Setting Up Receive Fax Options” inChapter 3, Using the MultiPASS Fax Setup Utility, for details.Receiving DocumentsDuring reception of a fax:❍ If the unit runs out of paper or if the BJ cartridge runs out of ink,the MultiPASS receives the remainder of the document in memory.❍ To stop receiving before the document is complete, press STOP.Then press * to cancel reception.❍ If the ALARM light is flashing for any reason, correct the error andthen press STOP. If necessary, see Chapter 8, Troubleshooting.❍ If an error occurs, the MultiPASS beeps intermittently for a fewseconds. If this happens, contact the other party and have themresend the document.5Receiving Faxes
