Option Description/SettingsCOLOR COPY MEDIA Select PLAIN PAPER when printing or copyingon plain paper, or HIGH RES. PAPER forspecial print media, such as Canon’s HighResolution Paper.RX MODE Sets the Receive Mode.FILE PRINT Prints documents stored in the MultiPASS’smemory (when the MultiPASS DesktopManager is installed).ROLLER CLEANING Cleans the rollers inside the MultiPASS.HEAD CLEANING Cleans the print head on the BJ cartridge.NOZZLE CHECK Prints a test pattern to check whether theBJ cartridge is functioning normally.N You can change the TX REPORT settings only through the MultiPASSFax Setup Utility.Entering Information in the MultiPASSWhen using the MultiPASS as a stand-alone fax machine, you must enteryour user information into the unit through the operator panel.When entering information through the operator panel of theMultiPASS, follow these guidelines.❍ If you pause and do not make an entry for more than 60 seconds,the MultiPASS returns to Standby mode. You must start theprocedure over from the beginning.❍ If you make a mistake while entering registration information, youcan correct it in one of two ways:• Press < or > to move the cursor under the wrong character, andthen enter the correct character.• Press STOP and reenter the information.B-2 Using the MultiPASS C635 as a Stand-alone Fax Appendix B
