Collating Copies/Prints3-303Basic Copying and Mail Box FeaturesCollating Copies/PrintsThe Finisher modes can be selected to collate the outputs in various ways, either by pages orcopy/print sets. You can specify whether the printed sheets are output face up or face down.IMPORTANTThe Finisher modes cannot be set if transparencies, tracing paper, or labels is selected.NOTE• For instructions on using the optional finishers, see Chapter 3, "Optional Equipment," in the ReferenceGuide.• To specify whether the printed sheets are output face up or face down, press [Face Up/Face Down] andselect from the following:- [Auto]: If you copy a single page original, or copy on nonstandard sized paper or other available paperloaded in the stack bypass, the printed sheets are output face up. Otherwise, the printed sheets areoutput face down.- [Face Down (Normal)]: Printed sheets are always output face down.- Face Up (Reverse)]: Printed sheets are always output face up.• If you set the Staple or Hole Punch mode, the side of the paper which is printed on will always be outputface down.
