Reserved Copying1-401Introduction to the Copy FunctionsReserved CopyingYou can set the machine to scan originals even while it is printing or waiting to process a job.NOTE• You can reserve up to five copy jobs, including the current job. The remote copy and interrupt copy jobsare not included in this count.• You can set different copy modes and paper sources, including the stack bypass, for each reserved job.(See "Using the Stack Bypass," on p. 1-42.)Reserving Copy JobsReserved printing can be specified in the following cases: While the Machine Is WaitingYou can specify copy settings or scan originals while the machine is in the waiting state, such as whenthe power is just turned ON, or after a paper jam is cleared. Copying automatically begins when themachine is ready. The message appears on the machine when it isable to process reserved copying.NOTEYou can specify reserved copying while the machine is in the waiting state in the following cases:- Between the time that the machine is turned ON and when it is ready to copy- After a paper jam is cleared- After a cover on the main unit or an optional unit, such as a finisher, is opened and closed While the Machine Is PrintingYou can specify copy settings for a new job while the machine is printing. Copying of the new jobautomatically begins when the current job is complete.
