Confirming/Changing/Cancelling Selected Settings 1-571Introduction to the Copy Functions2 Check the settings.If the desired modes are set, skip to step 4. Otherwise, press the key of the copy mode to bechanged or cancelled.If 10 or more copy modes are set, press [ ] to display the next screen. To return to the previousscreen, press [ ].The settings screen for the selected copy mode is displayed.NOTEA right triangle ( ) on a copy mode setting key indicates that more setting screens are availableby pressing the key.3 Change or cancel the selected copy mode (for example, Sharpness). To change a copy mode:❑ Perform the same steps used for setting the mode. Change the setting as you desire press [OK].The display returns to the Setting Confirmation screen.
