Interrupt Mode 1-511Introduction to the Copy FunctionsInterrupt ModeThis mode enables you to interrupt the current job or a reserved job to make priority copies.This mode is useful if you need to make a rush copy during a long copy job.IMPORTANTIf you select interrupt mode, you cannot use the Remote Copy or Cascade Copy mode.NOTEYou can make interrupt copies whenever the machine is ready to scan.1 Press [Interrupt].If you want to make copies after changing the Department ID while Department IDManagement is enabled, press enter the Department ID and password using -(numeric keys). (See Chapter 6, "System Manager Settings," in the Reference Guide.)NOTEThe current job does not stop printing immediately after you press [Interrupt]. Printing of thecurrent job stops only when the actual printing of the priority or interrupt copy starts.
