Making a Copy with the Image Combination and Frame Erase Modes (Process/Layout) 7-977Using the Express Copy Basic Features ScreenComposing Images (Form Composition)For instructions on this procedure using the Regular Copy Basic Features screen, see "ImageCombination," on p. 4-41.IMPORTANT• The Form Composition mode can not be used with the Remote Copy, Saddle Stitch, Front Cover/BackCover, Paper Insertion, Image Combination, Booklet, Transparency Interleaving, Image Repeat, ScanImage Check, Page Numbering/Copy Set Numbering, or Watermark/Print Date mode.• If you use the Form Composition mode with the Cascade Copy mode, it is necessary to assign thesame name to the stored image form in both this machine and the remote copy printer beforehand. Ifthe assigned image form name in this machine is not set in the remote copy printer, the job is cancelled.If multiple image forms with the same assigned name are stored in the remote copy printer, differentimage may be used for Form Composition.• To copy in the Form Composition mode, the Image form must be stored in the memory of the machine.(See Chapter 4, "Customizing Settings," in the Reference Guide.)• Form composition can be used together with other copy modes not listed above to process images.However, the copy modes other than Shift and Mirror Image modes can only be used for the copyimage, and not for the stored image forms.• Up to 100 image forms can be stored. However, this number varies depending on the capacity of thehard disk.• Copying performance may not be optimal in the Form Composition mode, depending on the selecteddocument and image form.1 Press [Process/Layout].
