Collating Copies/Prints 3-333Basic Copying and Mail Box Features If the Staple Mode Is Set:The copies are automatically collated into sets arranged in page order and stapled. The output is asfollows:• If you select [Corner] (Top Left):• If you select [Double] (Left):• If you select [Saddle Stitch]:IMPORTANT• The Staple mode cannot be used with the following mode(s).- Copy: Booklet, Transparency Interleaving- Mail Box: Booklet• The Saddle Stitch mode cannot be used with the following mode(s) in addition to the modes mentionedabove.- Copy: Remote or Cascade Copy, Hole Punch, 2 1-Sided, Book 2-Sided, Automatic PaperSelection, Two-page Separation, Cover/Sheet Insertion, Image Combination, Form Composition, TabPaper Creation, Page/Copy Set Numbering, Watermark/Print Date- Mail Box: Automatic Paper Selection, Cover/Job Separator, Cover/Sheet Insertion, Form Composition,Tab paper Creation, Page/Copy Set Numbering, Watermark/Print Date• If [Add Cover] is selected in the Saddle Stitch mode, it cannot be used with the following mode(s) inaddition to the modes mentioned above.- Copy: Image Repeat, Mirror Image• The accuracy of folds created in the Saddle Stitch mode may vary, depending on the paper type and thenumber of sheets.Originals Set 2Set 1 Set 3Three Copiesof Each PageCollated inPage OrderOriginals Set 2Set 1 Set 3Three Copiesof Each PageCollated inPage OrderOriginals Set 2Set 1 Set 3Three Copiesof Each PageCollated inPage Order
