Booklet Mode 4-314Special Copying and Mail Box FeaturesIMPORTANT• You must select the same paper size for the cover page as that used for copying the maindocument.• Only 64 to 200 g/m2 paper can be used for the cover page.• Only 64 to 90 g/m2 paper can be used for the main document.• If you select [Add Cover], you cannot specify the stack bypass as the paer source used for themain document.• When printing on special types of paper, such as heavy paper or transparencies, be sure tocorrectly set the paper type, especially if you are using heavy paper. If the type of paper is not setcorrectly, it could adversely affect the quality of the image. Moreover, the fixing unit may becomedirty, or the paper could jam, and a service repair may be needed.NOTEYou must load the paper for the cover page face down in the stack bypass.4 Select whether to saddle stitch the booklet press [OK]. If [Divided Booklet] is selected:❑ Specify the number of sheets that you want to divide by using [-] and [+] press [OK].You can set the number of sheets to be divided from 1 to 15.You can also enter values using - (numeric keys).The selected mode is set.
