Model 190 Installation, Technical and Operation8400-M022-O1 Rev JPage 15015.3 SetupEnter SETUP and proceed to the Options Setup.optionWith option displayed, press the TARE key. The display willchange to show opt=. Proceed to the opt= parameter.opt?With opt? displayed, press the TARE key. The display willchange to no. Press the Fn/ key to toggle to yes and thenpress the TARE key. The display will change to opt=.Proceed to the opt= parameter. Otherwise, to skip the OptionsSetup, press the TARE key to advance to the fUnC?. prompt.oPt= (Option)Press the TARE key to show the current setting. If the settingdisplayed is acceptable, press the TARE key again to save it.Otherwise, use the Fn/▲ key to toggle to a new setting and thenpress the TARE key to save it. Allowable values are:0 = No Option Card Installed1 = Serial Interface, Ethernet, WiFi or USB Option CardInstalled2 = not applicable3 = not applicable4 = Digital to Analog Converter Option Card InstalledbAUd= (Optional Serial Interface Baud Rate)Press the TARE key to show the current setting. If the settingdisplayed is acceptable, press the TARE key again to save it.Otherwise, use the Fn/ key to toggle to a new baud rate for theserial ports and then press the TARE key to save it. Allowablesettings are:12 = 1200 Baud 24 = 2400 Baud 48 = 4800 Baud96 = 9600 Baud 19 = 19.2k Baud 38 = 38.4k Baud76 = 76.8k Baud
