9.3.59 Homing error distance (0x8695 / 0x111) 1859.3.60 Mechanical brake failure (0xFF01 / 0x112) 1869.3.61 Short circuit in mechanical brake control (0xFF02 / 0x113) 1869.3.62 External interface power failure (0xFF0A / 0x114) 1869.3.63 Communication interrupted (0xFF10 / 0x14F) 1869.3.64 Fan feedback inconsistent (0xFF21 / 0x145) 1879.3.65 Fan lifetime critical (0xFF22 / 0x15A) 1879.3.66 Timing violation 1 (0xFF60 / 0x115) 1879.3.67 Timing violation 2 (0xFF61 / 0x116) 1879.3.68 Timing violation 3 (0xFF62 / 0x117) 1889.3.69 Timing violation 4 (0xFF63 / 0x118) 1889.3.70 Timing violation 5 (0xFF64 / 0x119) 1889.3.71 Timing violation 6 (0xFF65 / 0x11A) 1889.3.72 Timing violation 7 (0xFF66 / 0x168) 1889.3.73 Timing violation 8 (0xFF67 / 0x16B) 1899.3.74 Timing violation 9 (0xFF68 / 0x16C) 1899.3.75 Firmware: Package description mismatch (0xFF70 / 0x11B) 1899.3.76 Firmware: Power cycle needed (0xFF71 / 0x11C) 1899.3.77 Firmware: Update started (0xFF72 / 0x11D) 1909.3.78 Firmware: Update invalid (0xFF73 / 0x15B) 1909.3.79 STO active while drive enabled (0xFF80 / 0x11E) 1909.3.80 STO mismatch (0xFF81 / 0x11F) 1909.3.81 P_STO error (0xFF85 / 0x120) 1919.3.82 Guide value reversed (0xFF90 / 0x121) 1919.3.83 Guide value implausible (0xFF91 / 0x122) 1919.3.84 Sign of life error (0xFF95 / 0x14E) 19110 Maintenance, Decommissioning, and Disposal 19210.1 Warnings 19210.2 Maintenance Tasks 19210.3 Inspection during Operation 19210.3.1 System Components 19210.4 Repair 19310.5 System Component Replacement 19410.5.1 Dismounting the System Components 19410.5.2 Fitting and Commissioning the System Components 19610.6 Cable Replacement 19610.6.1 Overview 19610.6.2 Feed-In Cable Replacement 19710.6.2.1 Disconnecting the Feed-In Cable 19710.6.2.2 Replacing the Feed-In Cable 19710.6.2.3 Connecting the Feed-In Cable 197ContentsOperating Guide | VLT® Multiaxis Servo Drive MSD 510 SystemAQ262450196490en-000101 / | 11Danfoss A/S © 2019.10