1 - 153Chapter 1 TroubleshootingVersion 3 2008.06.13Flows 84 Low Density 093-920AENDYesError and toner checkCheck that DELL toner is installed. Ifnot, check the toner level in themagenta toner cartridge and replace asnecessary.Does the error still occur after turningthe power off and on?NoYesChecking the PHD ASSY sealing tapeAfter turning the printer off, open thefront cover and remove the PHD ASSYfrom the printer.Remove any of the 8 pieces of sealingtape that may be left on the PHD ASSY.Then, install the PHD ASSY into theprinter.If the tape is found, it takes a long timeuntil the density is recovered. To usethe printer immediately, change thePHD ASSY to another one.Does the error still occur after turningthe power off and on?YesChecking the TNR (M) MOT (MOTORASSY DISP) for rotationDoes the TNR (M) MOT (MOTORASSY DISP) function normally?- PC Operation :Checked by the [Dispense MotorConfiguration Check (Magenta) ] of the[Machine Check] of [Diagnosis] tab inthe [Tool Box].- Panel Operation :Checked by [Digital Output]-[DO-23] of[IOT Diag] in [Printer Diag] ofdiagnosis.During this check, close the COVERASSY FRONT.ENDNoNoReplace the Printer.
