1 - 265Chapter 1 TroubleshootingVersion 2 2008.03.31FIP-1. 36 Load Tray 1 024-910Step Check RemedyYes NoPossible causative parts:PWBA CONT AIO (PL10.6.6)PWBA MCU (PL10.7.7)1 Checking the paper sizeDoes the using paper size meet the specification? Go to step 3.Use the paper thatmeets thespecifications,then go to step 2.2 Does the error still occur when printing? Go to step 3. End of work.3Checking the print data, paper (print media) and papersettingsCheck the followings.- Are the print data and the paper suitable?- Are the paper setting and paper suitable?- Are the paper setting and print data suitable?- Are the original and the paper suitable?After checking, correct the incorrect item(s).Does the error still occur when printing?Go to step 4. End of work.4Checking after reloading a paper and the CASSETTE ASSY250Reload a correct paper into the CASSETTE ASSY 250.Reseat the CASSETTE ASSY 250 correctly.Does the error still occur when printing?Go to step 5. End of work.5Checking after replacing the PWBA MCUReplace the PWBA MCU. (Refer to Removal 31/Replacement 29.)Does the error still occur when printing?Replace thePWBA CONTAIO. (Refer toRemoval 24/Replacement 36.)End of work.
