1 - 220Chapter 1 TroubleshootingVersion 2 2008.03.31FIP-1. 4 Paper Jam 005-110/005-121 / Job was Finished 005-124Step Check RemedyYes NoPossible causative parts:PWBA CONT AIO (PL10.6.6)ADF ASSY (PL10.10.1)KIT ROLL FEED (PL10.10.97)1 Checking the documentDoes the document meet the ADF SPEC? Go to step 2.Use the platenmode or changethe paper type.2Checking the connector connectionReseat the connector (P/J1003) on the PWBA CONT AIO.Does the error still occur when copying?Go to step 3. End of work.3 Checking the ADFIs the ADF closed against platen glass completely? Go to step 4. Close the ADFcompletely.4 Checking the paper feedingDoes the ADF feed the document? Go to step 5. Go to step 7.5Checking the document pathOpen the ADF Cover and check the document path.Is there the foreign substance on the document path?Remove theforeign substance. Go to step 6.6Checking after replacing the ADF ASSYReplace the ADF ASSY.(Removal 59/Replacement 2)Does the error still occur when copying?Replace thePWBA CONTAIO. (Removal24/Replacement36)End of work.7Checking the ADF Feed Roller installationIs the roller installed correctly?Also are they not contaminated or damaged, and rotatesmoothly?Replace the ADFASSY. (Removal59/Replacement2)Replace the ADFFeed Roller.
