3 - 31Chapter 3 Removal and Replacement Procedures (RRPs)RRP1.8 LOWER FRONT COVER (PL 1.1.13), COVER FRONT-U (PL 1.1.14)[Removal]1) Remove COVER ASSY RH. (RRP 1.12)2) Remove LEFT COVER. (RRP 1.10)3) Remove MULTIPURPOSE FEEDER COVER. (RRP 1.7)4) Remove OPERATOR PANEL. (RRP 1.9)5) Remove a screw (silver, with a flange, tap, 8mm) that fix COVER CONPANE (PL 1.1.35) onCOVER FRONT-U (PL 1.1.14).6) Remove COVER CONPANE 2 from COVER FRONT-U.7) Remove HARNESS ASSY PANEL (PL 1.1.24) from the left side hinge section of COVERFRONT-U.8) Remove four screws (silver, with a flange, 8mm) that fix LOWER FRONT COVER (PL 1.1.3)on the main unit.9) Slide LOWER FRONT COVER to the right, release the hooks at two locations on the rear faceof LOWER FRONT COVER from the holes on the main unit, and remove LOWER FRONTCOVER together with COVER FRONT-U.Try not to break the boss of COVER FRONT-U when carrying out the work shown below.10) Push the boss parts on right and left sides of COVER FRONT-U to pull it out from the holes inLOWER FRONT COVER and remove COVER FRONT-U from LOWER FRONT COVER.[Replacement]Try not to break the boss of COVER FRONT-U when carrying out the work shown below.1) Depress the boss of COVER FRONT-U, match the hole in LOWER FRONT COVER and attachCOVER FRONT-U to LOWER FRONT COVER.When carrying out the work shown below, be careful so that the harness will not becaught between the main unit and the LOWER FRONT COVER.2) Match the hooks at two locations on the rear side of LOWER FRONT COVER to the holes inmain unit, and attach LOWER FRONT COVER together with COVER FRONT-U.3) Fix LOWER FRONT COVER on the main unit using four screws (silver, with a flange, tap,8mm).4) Pull HARNESS ASSY PANEL around the left side hinge of COVER FRONT-U.When carrying out the work shown below, take care not to allow the harness to be caughtbetween COVER FRONT-U and COVER CONPANE 2.5) Attach COVER CONPANE 2 to COVER FRONT-U.6) Fix COVER CONPANE 2 on COVER FRONT-U using a screw (silver, with a flange, 8mm).7) Attach OPERATOR PANEL. (RRP 1.9)8) Attach MULTIPURPOSE FEEDER COVER. (RRP 1.7)9) Attach LEFT COVER. (RRP 1.10)10) Attach COVER ASSY RH. (RRP 1.12)
