3 - 353Chapter 3 Removal and Replacement Procedures (RRPs)RRP14.27 STOPPER CST R (PL 14.3.31)[Removal]1) Remove 500 SHEET PAPER TRAY. (RRP 14.1)2) Remove 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)3) Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)4) Remove 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)5) Remove CLUTCH ASSY PH. (RRP 14.11)6) Remove DRIVE ASSY FEED. (RRP 14.9)7) Remove HOUSING ASSY FEED. (RRP 14.18)8) Remove CHUTE ASSY RETARD. (RRP 14.29)9) Remove GUIDE CST R. (RRP 14.25)Be sure not to loose SPG LOCK CST LL when carrying out the work shown below.10) Remove STOPPER CST R (PL 14.3.31) from GUIDE CST R (PL 14.3.29).[Replacement]1) Attach SPG LOCK CST LL (PL 14.3.33) to the boss of STOPPER CST R and attach STOPPERCST R to GUIDE CST R.Check that SPG LOCK CST LL is placed in the boss of STOPPER CST R and GUIDECST R properly.2) Attach GUIDE CST R. (RRP 14.25)3) Attach CHUTE ASSY RETARD. (RRP 14.29)4) Attach HOUSING ASSY FEED. (RRP 14.18)5) Attach DRIVE ASSY FEED. (RRP 14.9)6) Attach CLUTCH ASSY PH. (RRP 14.11)7) Attach 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)8) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)9) Attach 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)10) Attach 500 SHEET PAPER TRAY. (RRP 14.1)
