3 - 99Chapter 3 Removal and Replacement Procedures (RRPs)RRP3.19 ROLL ASSY FEED (PL 3.3.11)[Removal]1) Remove 250 SHEET PAPER TRAY. (RRP 2.1)2) Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)3) Remove CLUTCH ASSY PH. (RRP 3.7)4) Remove DRIVE ASSY FEED 250. (RRP 3.5)5) Remove HOUSING ASSY FEED. (RRP 3.14)6) Remove two screws (silver, tap, 8mm) that fix COVER FEED (PL 3.3.13) to HOUSING ASSYFEED.7) Remove COVER FEED from HOUSING ASSY FEED.8) Remove E rings that fix both sides of SHAFT FEED (PL 3.3.12) from HOUSING ASSY FEED,and remove left and right BEARING EARTH (PL 3.3.9).9) First slide SHAFT FEED to the right and pull SHAFT FEED out from the left side bearing ofHOUSING ASSY FEED, and remove SHAFT FEED together with ROLL ASSY FEED (PL3.3.11) and ROLL SUPPORT (PL 3.3.10).10) Release the hook of the right side ROLL SUPPORT that fixes ROLL SUPPORT to SHAFTFEED, and remove ROLL SUPPORT.11) Release the hook of ROLL ASSY FEED that fixes ROLL ASSY FEED to SHAFT FEED, andremove ROLL ASSY FEED.[Replacement]Pay attention to fitting direction of ROLL ASSY FEED when carrying out the work shownbelow.1) Attach ROLL ASSY FEED to SHAFT FEED so that the hook is directed rightward, and fix thehook of ROLL ASSY FEED to the groove of SHAFT FEED.2) Attach ROLL SUPPORT to SHAFT FEED, and fix the hook of ROLL SUPPORT to the grooveof SHAFT FEED.3) After placing the right side of SHAFT FEED in the right side bearing of HOUSING ASSYFEED, slide SHAFT FEED to the left and attach it together with ROLL ASSY FEED andROLL SUPPORT.4) Match the double D-CUT face of BEARING EARTH to the right and left sides bearing ofHOUSING ASSY FEED, attach BEARING EARTH and then fix the both sides of SHAFTFEED using the E rings.5) Attach COVER FEED to HOUSING ASSY FEED.6) Fix COVER FEED to HOUSING ASSY FEED using two screws (silver, tap, 8mm).7) Attach HOUSING ASSY FEED. (RRP 3.14)8) Attach DRIVE ASSY FEED 250. (RRP 3.5)9) Attach CLUTCH ASSY PH. (RRP 3.7)10) Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)11) Attach 250 SHEET PAPER TRAY. (RRP 2.1)
