3 - 331Chapter 3 Removal and Replacement Procedures (RRPs)RRP14.18 HOUSING ASSY FEED (PL 14.4.1)[Removal]1) Remove 500 SHEET PAPER TRAY. (RRP 14.1)2) Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)3) Remove CLUTCH ASSY PH. (RRP 14.11)4) Remove DRIVE ASSY FEED. (RRP 14.9)5) Release a hook of GEAR FEED (PL 14.3.4) fixed on the shaft of HOUSING ASSY FEED (PL14.4.1) and remove GEAR FEED.6) Remove connector (P/J618) of HOUSING ASSY FEED.7) Remove a screw (silver, with a flange, 6mm) that fixes HOUSING ASSY FEED on 500 SHEETFEEDER ASSEMBLY.8) Put both of your hands from the front side of 500 PAPER FEEDR ASSY, pull levers at twolocations of HOUSING ASSY FEED toward you, and disengage the boss of HOUSING ASSYFEED from the hole of 500 PAPER FEEDR ASSY.9) Move HOUSING ASSY FEED forward, release the hooks at four locations fixed on 500SHEET FEEDER ASSEMBLY, disengage the hole of HOUSING ASSY FEED from front sideconvex of 500 SHEET FEEDER ASSEMBLY and remove HOUSING ASSY FEED downwards.[Replacement]Try not to break ACTUATOR (PL 14.4.7) on HOUSING ASSY FEED when carrying outthe work shown below.1) Match the four hooks of HOUSING ASSY FEED (PL 14.4.1) to the fitting position of 500SHEET FEEDER ASSEMBLY and attach it.2) Move HOUSING ASSY FEED backwards and insert the boss of HOUSING ASSY FEED inthe hole in 500 SHEET FEEDER ASSEMBLY and insert convex of 500 SHEET FEEDERASSEMBLY to the front side hole of HOUSING ASSY FEED.3) Fix HOUSING ASSY FEED on 500 SHEET FEEDER ASSEMBLY using a screw (silver, witha flange, 6mm).4) Attach connector (P/J618) of HOUSING ASSY FEED.5) Attach GEAR FEED (PL 14.3.4) to the shaft of HOUSING ASSY FEED and fix a hook ofGEAR FEED in the groove of shaft of HOUSING ASSY FEED.6) Attach DRIVE ASSY FEED. (RRP 14.9)7) Attach CLUTCH ASSY PH. (RRP 14.11)8) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)9) Attach 500 SHEET PAPER TRAY. (RRP 14.1)
