3 - 237Chapter 3 Removal and Replacement Procedures (RRPs)RRP9.1 DEVELOPER LATCH ASSEMBLY (PL 9.1.1)[Removal]1) Remove COVER ASSY RH. (RRP 1.12)2) Remove LEFT COVER. (RRP 1.10)3) Remove MULTIPURPOSE FEEDER COVER. (RRP 1.7)4) Remove LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)5) Remove LOW/HIGH VOLTAGE POWER SUPPLY. (RRP 12.7)6) Remove three screws (silver, with a flange, tap, 8mm) that fixes DEVELOPER LATCHASSEMBLY (PL 9.1.1) to the main unit.7) Release the hooks at three locations that fix DEVELOPER LATCH ASSEMBLY to the mainunit and remove DEVELOPER LATCH ASSEMBLY.[Replacement]1) Match three hooks of DEVELOPER LATCH ASSEMBLY to the fitting position and attach itto the main unit.2) Fix DEVELOPER LATCH ASSEMBLY to the main unit using three screws (silver, with aflange, tap, 8mm).3) Attach LOW/HIGH VOLTAGE POWER SUPPLY. (RRP 12.7)4) Attach LOWER FRONT COVER and COVER FRONT-U. (RRP 1.8)5) Attach MULTIPURPOSE FEEDER COVER. (RRP 1.7)6) Attach LEFT COVER. (RRP 1.10)7) Attach COVER ASSY RH. (RRP 1.12)
