3 - 309Chapter 3 Removal and Replacement Procedures (RRPs)RRP14.7 500 SHEET FEEDER CHUTE ASSEMBLY (PL 14.2.2)[Removal]1) Remove 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)2) Remove a screw (silver, with a flange, tap, 8mm) that fix 500 SHEET FEEDER CHUTEASSEMBLY (PL 14.2.2) to 500 SHEET FEEDER ASSEMBLY.Try not to break the boss of 500 SHEET FEEDER CHUTE ASSEMBLY when carrying outthe work shown below.3) Open 500 SHEET FEEDER CHUTE ASSEMBLY (PL 14.2.2).4) Depress the fitting part at right side of 500 SHEET FEEDER CHUTE ASSEMBLY, removethe boss part on the right side from the hole in 500 SHEET FEEDER ASSEMBLY and takeout 500 SHEET FEEDER CHUTE ASSEMBLY.[Replacement]Try not to break the boss of 500 SHEET FEEDER CHUTE ASSEMBLY when carrying outthe work shown below.1) With 500 SHEET FEEDER CHUTE ASSEMBLY open, insert the boss part on the left in thehole in 500 SHEET FEEDER ASSEMBLY, and then depress the boss part on the right sideand attach 500 SHEET FEEDER CHUTE ASSEMBLY to 500 SHEET FEEDER ASSEMBLY.2) Close 500 SHEET FEEDER CHUTE ASSEMBLY.3) Attach 500 SHEET FEEDER CHUTE ASSEMBLY (PL 14.2.2) to 500 SHEET FEEDERASSEMBLY using a screw (silver, with a flange, tap, 8mm).4) Attach 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)
