3 - 116Chapter 3 Removal and Replacement Procedures (RRPs)RRP3.26 CHUTE ASSY RETARD 250 (REFERENCE ONLY)[Removal]1) Remove 250 SHEET PAPER TRAY. (RRP 2.1)2) Remove 250 SHEET FEEDER RIGHT COVER. (RRP 3.4)3) Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)4) Remove 250 SHEET FEEDER CHUTE ASSEMBLY. (RRP 3.3)5) Remove CLUTCH ASSY PH. (RRP 3.7)6) Remove DRIVE ASSY FEED 250. (RRP 3.5)7) Remove HOUSING ASSY FEED. (RRP 3.14)8) Remove two screws (silver, tap, 8mm) that fix CHUTE ASSY RETARD 250 to 250 SHEETFEEDER ASSEMBLY.9) Remove a screw (silver, 6mm) that fix BRACKET MAG R (PL 3.2.46) to 250 SHEET FEEDERASSEMBLY.10) Remove BRACKET MAG R from 250 SHEET FEEDER ASSEMBLY.11) Remove the shaft of right side on CHUTE ASSY RETARD 250 from the bearing of GUIDECST R 250 (PL 3.2.33).12) Remove the shaft of left side on CHUTE ASSY RETARD 250 from the bearing of GUIDE CSTL 250 (PL 3.2.34) and remove CHUTE ASSY RETARD 250 from 250 SHEET FEEDERASSEMBLY.[Replacement]1) Attach the shaft of left side on CHUTE ASSY RETARD 250 to the bearing of GUIDE CST L250 (PL 3.2.34).2) Attach the shaft of right side on CHUTE ASSY RETARD 250 to the bearing of GUIDE CST R250 (PL 3.2.33) and attach CHUTE ASSY RETARD 250 to 250 SHEET FEEDER ASSEMBLY.3) Put BRACKET MAG R (PL 3.2.46) in the notched of 250 SHEET FEEDER ASSEMBLY,match the hole of BRACKET MAG R to the boss of 250 SHEET FEEDER ASSEMBLY andattach BRACKET MAG R.4) Fix BRACKET MAG R to 250 SHEET FEEDER ASSEMBLY using a screw (silver, 6mm).5) Fix CHUTE ASSY RETARD 250 to 250 SHEET FEEDER ASSEMBLY using two screws(silver, tap, 8mm).6) Attach HOUSING ASSY FEED. (RRP 3.14)7) Attach DRIVE ASSY FEED 250. (RRP 3.5)8) Attach CLUTCH ASSY PH. (RRP 3.7)9) Attach 250 SHEET FEEDER CHUTE ASSEMBLY. (RRP 3.3)10) Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)11) Attach 250 SHEET FEEDER RIGHT COVER. (RRP 3.4)12) Attach 250 SHEET PAPER TRAY. (RRP 2.1)
